LEED Certified | Non-Toxic Powder Coating | 25-Year Limited Warranty

Classic

CLEARLY BUILT FOR TIMELESS BEAUTY & STRENGTH

When beauty factors into perimeter security, Classic’s stately elegance is an
incomparable choice.
Difficult to climb or penetrate, made to last, and incredibly attractive, Classic’s V-shaped braces along the length of each steel panel add lateral strength, and its adaptability to elevation and directional changes (120° swing) make this fence ideal for nearly any application.

AVAILABLE IN:

SPECS & DOWNLOADS | BROCHURE

❱ INSTALLATION VIDEO

STANDARD BRACKET

PANEL

POST

45 ANGLED EXTENSION*

* Optional components.
Black post cap included. Posts are available in multiple sizes and lengths. V, T or 45-degree extensions are available welded to posts or add-on. Wire dimensions are center to center.

Steel Brackets attach to posts using a #14 x 1 ½” self-tapping screw (Stainless Steel is recommended; obtain locally). This allows the brackets (hardware included) to be installed anywhere on the Post. 3” x 3” 11-gauge posts are always preferred for all panels. At your discretion, smaller size posts may be used for panels 5’ and under. However, it is strongly recommended to ONLY use 3” x 3” 11-gauge posts (at a minimum) for installations with panels taller than 5’. Please consult an engineer, architect or other expert to ensure you are using the correct size post. And, always check your local building codes. Please contact one of our Distributors for more details.

SPECS, DOWNLOADS AND CERTIFICATIONS

Height	Length	Opening	Steel Bracket	Gauge	Wire Breaking Load
25 3/8"	95 1/4”	2X6”	2	6	80,000 - 110,000 PSI
43 4/4”	95 1/4”	2X6"	2	6	80,000 - 110,000 PSI
62 3/16”	95 1/4”	2X6”	3	6	80,000 - 110,000 PSI
73 1/4”	95 1/4”	2X6”	4	6	80,000 - 110,000 PSI
98 1/6”	95 1/4”	2X6”	5	6	80,000 - 110,000 PSI

Note: Posts are available in multiple sizes, lengths, and with angled extensions. Please contact one of our Distributors for more details.

DRAWINGS

MAINTENANCE GUIDE

WARRANTY

Certifications

Designmaster Fence components meet or exceed the requirements and tolerances of applicable ASTM standards to ensure industry compliance. Click through to learn more about each certification.

Specification for Carbon-Steel Wire

Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

Standard Practice for Operating Salt Spray (Fog) Apparatus

Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

Tab Content

This is a basic text element.

Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

Standard Test Methods for Rating Adhesion by Tape Test

Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes greater than 6 in.

Exposure to ultraviolet light for at least 1,000 hours

Humidity resistance in a weather meter chamber

Classic

COMPONENTS

SPECS, DOWNLOADS AND CERTIFICATIONS

DRAWINGS

Certifications

Tab Content

Videos